Our company is registered in England under company number Reg No 07839854.
While we believe that we have built a reputation for providing goods and services to the highest competitive standard, even the best of enterprises must take account of the possibility however remote, of error, omission or wrongdoing. We therefore draw your attention to the following standard conditions which contain provisions defining and limiting our liability in respect of any potential default. Copying, whether of words, images or other material is likely to comprise a breach of copyright unless it is authorised. Customers should not request copying services unless they are sure that they comply with the warranties contained below.
In these Conditions:- “the Company” means Teetotal Ltd;
“the Commissioned Work” means the physical design work, copying, printing, scanning, archiving or other work howsoever described including where the context so admits, each edition of a periodical publication ordered by the Customer from the Company;
“the Customer” means the person, firm, company or organisation who orders the Commissioned Work pursuant to these Conditions;
“the Customer’s Materials” means all materials delivered to the Company by or on behalf of the Customer ;
“Intellectual Property Rights” means any copyright, design right, registered design, trade mark whether registered or not, right of confidentiality or any other similar right whether arising in the United Kingdom or elsewhere in the world.
“Origination Items” as defined in Condition 21(b)
The Company and the Customer shall contract subject to these Conditions which shall govern their relationship to the exclusion of any other terms and conditions contained or referred to in the Customer’s order or in correspondence or elsewhere or implied by trade custom, practice or course of dealing and any purported provisions to the contrary are hereby excluded. No variation of these Conditions shall be binding upon the Company unless made in writing and signed by a duly authorised representative of the Company.
(a) Unless expressly stated to the contrary all costs and fees are exclusive of any applicable value added or any other sales tax and any applicable delivery charges, for which the Customer shall be additionally liable.
(b) The Company reserves the right to increase any part of the costs or fees payable:- (i) in respect of design work where the Customer’s requirements are not clear, necessitating the production of additional proofs; (ii) where poor quality artwork is provided by the Customer necessitating a redraw; (iii) where the Commissioned Work is ordered less than ten working days prior to delivery, to reflect any increase in the cost to the Company such as, without limitation, increases in the costs of labour, materials or other costs; (iv) any change in delivery dates, quantities or specifications requested by the Customer; (v) any delay caused by any instructions of the Customer changes to the Order, failure of the Customer to give the Company adequate information or failure of the Customer to supply clear or legible copy; (vi) failure or delay of the Customer to take delivery instructions. The Company shall seek to notify the Customer of the amount of any increase as soon as reasonably practicable. The Customer shall have the right to cancel the order if the reason for the price increase is as set out in paragraph (iii) above and the price has increased by more than 10% provided notice of cancellation is given by the Customers as soon as reasonably practicable on receiving notification of such increase but the Customer shall pay the Company on a pro rata basis calculated from the costs and fees originally agreed for any part of the Commissioned Work which had been completed at the time of cancellation of the order. If the reason for the increase is as set out in paragraphs (1)(i), (ii), (iv) (v) or (vi) above the Customer may cancel if the price increase is more than 20% and in such circumstances the pro rata costs payable by the Customer shall be calculated on the increased costs.
(c) Without prejudice to the above, the Company will not be bound by any estimate or quotation given until it has received complete instructions and has accepted the Order.
(d) Unless otherwise agreed in writing by the Company, payment of the Company’s invoices shall be made upon receipt of invoice.
(e) Customers may apply to become credit account Customers which application may be accepted at the Company’s sole discretion. Credit account Customers shall pay the Company within 30 days of the date of the Company’s invoice.
Commercial Debt Act 1998 as amended. (g) The Company may require the Customer to pay a deposit at the time the order is placed. Furthermore, if in the opinion of the Company, the creditworthiness of the Customer shall have deteriorated prior to delivery, the Company may require full or partial payment of the price prior to delivery.
(f) If the Customer fails to make payment on the due date, the Company shall be entitled to charge the Customer interest under the Late Payment of Commercial Debt Act 1998 amended.
(g) When purchasing online, please be aware that due to the fact this is a bespoke product, all orders are subject to sight of artwork (not everything can be printed with all processes). We will need vector artwork (AI or EPS) If you don’t have that then please contact us prior to ordering. Due to practical limitations, we may occasionally require additional artwork or edits to existing designs to make it work with the process requested. If your artwork is particularly complicated, has more colours or more print locations than those on the offer then additional charges will apply and we will contact you with details. Turnaround time will vary between 7-14 working days depend on the process. After the order is placed we will be in touch as soon as possible to confirm the order details and turnaround times. If you have any questions or a specific deadline for delivery then please contact us before you order.
4. Preliminary Work
The Company shall charge and the Customer shall pay the Company for all preliminary work carried out, whether experimental or otherwise, at the Customer’s request. In the event that the Company accepts early termination by the Customer of any preliminary work, the Customer shall pay the Company for the preliminary work, if any, carried out prior to such termination on a pro rata basis.
It shall be the responsibility of the Customer to inspect all proofs submitted for approval and the Company shall not be liable to the Customer for any errors not corrected by the Customer in proofs so submitted. The Customer’s alterations, except typographical or other errors made by the Company, and any additional proofs necessitated thereby shall be charged extra to the Customer.
6. Print & Embroidery
(a) Due to the nature of the processes involved, the Company does not guarantee that the Commissioned Work will match the Customer’s Materials in colour, saturation or texture.
(b) Customers who require colour reproduction to a specific standard must state this requirement in writing in their order and request samples, which may be available at the Companies’ discretion. An additional charge shall be made to the Customer for this service which shall be agreed with the Customer prior to commencement of the Commissioned Work.
(c) The Customer shall be responsible for ensuring that the Customer’s Materials supplied are suitable for print or embroidery and the Customer’s attention is brought to Condition 20(b) in this respect.
(d) It is your responsibility to proof any embroidery disk prior to production and Teetotal Ltd is not responsible for any damaged garments. All goods remain the property of Teetotal Ltd until paid for in full. Once artwork has been approved Teetotal Ltd will not be responsible for any change in design or circumstance and payment will still be required for the approved order.
7. Variations in Quantity
The Company shall endeavour to deliver the correct quantity of the Commissioned Work but orders for the Commissioned Work are accepted on the condition that the Customer accepts a margin of 5% for over supply or shortfalls in quantity.
Delivery of the Commissioned Work shall be made by the Customer collecting the Commissioned Work at the Company’s premises at any time after the Company has notified the Customer that the Commissioned Work is ready for collection or, if some other place for delivery is agreed by the Company, by the Company delivering the Commissioned Work to that place.
9. Free Delivery
Any free delivery will be based on a job by job basis and is at the sole discretion of the Company
The Company shall endeavour to fulfil all orders which may from time to time be placed with it by the Customer and shall endeavour to comply with delivery dates quoted but the time for delivery shall not be of the essence. THE COMPANY SHALL NOT BE LIABLE FOR ANY LOSS DIRECTLY OR INDIRECTLY ATTRIBUTABLE TO ANY DELAY BEYOND THE STATED DELIVERY DATE. UNLESS SUCH DELAY HAS BEEN CAUSED BY THE COMPANY’S FAILURE TO USE ITS ENDEAVOURS TO COMPLY WITH DELIVERY DATES.
Where the order is to be delivered in instalments, each delivery shall constitute a separate contract and failure by the Company to deliver any one or more of the instalments in accordance with these Conditions or any claim by the Customer in respect of any one or more of the instalments shall not entitle the Customer to treat the order as a whole as repudiated or cancelled.
12. Risk & Title
The risk in the Commissioned Work shall pass to the Customer on delivery and the Customer should therefore be insured accordingly.
Not withstanding delivery and passing of risk, the legal property in and beneficial ownership of the Commissioned Work shall remain with the Company until the Customer has paid all money owed by it to the Company.
The Company may for the purpose of checking that these Conditions are being complied with or recovering the Commissioned Work enter upon any premises where it is stored or where the Company reasonably believes it to be stored.
Until payment is made the Customer shall possess the Commissioned Work as fiduciary agent and bailee only and shall store each item of the Commissioned Work securely and separately from the Customer’s own goods or those of any other person or previously Commissioned Work and in a manner which makes them readily identifiable by reference to the Company’s invoices.
The Customer’s right to possession of the Commissioned Work shall cease if any of the events described in Condition 29 occurs.
The Customer grants the Company an irrevocable licence to enter at any time any vehicle or premises owned or occupied by the Customer or in its possession for the purpose of repossessing and removing any of the Commissioned Work the property in which has remained in the Company under Condition 13. The Company shall not be responsible for and the Customer will indemnify the Company against liability in respect of damage caused to such vehicles or premises in such repossession and removal being damage it was not reasonably practicable to avoid.
Conditions 12, 13, 14, 15, 16 and 17 are without prejudice to the Company’s rights and remedies if the Customer fails to make payment on the due date or is otherwise in breach of the terms of these Conditions.
19. Standing Material
All materials used by the Company in fulfilling an Order belong to the Company absolutely subject to Condition 21 below regarding origination items.
20. Customer’s Materials
(a) Whilst the Company shall endeavour to preserve the Customer’s Materials in good order (subject to such wear and tear as may be incurred in the course of printing or carrying out the design work), they remain at the Customer’s risk and liability for damage to, destruction or loss of such materials is excluded save where such damage, destruction or loss is caused by the Company’s negligence. The Customer shall supply adequate quantities of such materials to cover spoilage.
(b) Whilst the Company shall endeavour to maintain its usual quality standards where the Customer’s Materials are used, the Company shall not be liable for imperfect work caused by defects in or unsuitability of the Customer’s Materials and the Customer shall not be entitled to reject such work for such reason.
(c) The Company shall have a lien over the Customer’s Materials against payment of all costs or fees due to it by the Customer from time to time and shall be entitled (if any payment is not made on the due date) to dispose of the Customer’s Materials for such sums (if any) as the Company may in its discretion think appropriate towards settlement of the amount due.
21. Design & Artwork
(a) Design work submitted by the Customer – By submitting your design file, you acknowledge that you have obtained all proper permissions or licensing for the use of any pattern or designs protected by Copyrights, Patents, Trademarks or other intellectual property rights and you hereby agree to hold harmless and indemnity Teetotal Ltd and it’s partners, employees, affiliates and agents against all loss, expenses, damages, costs and legal fees by reason of any actions based on the infringement thereof.
(b) ) Design work submitted by the Company – All design work originated by the company shall, as to its material elements and as to the copyright or design right in relation to it, belong to the Company, and the Customer shall not have any right to reproduce or authorise any other person to reproduce any such design work in whole or in part or to do any act which would, in the absence of authorisation by the Company, infringe any Copyright or design right which may subsist in relation to any such design work.
(c) In the course of the design work the Company may originate physical material (including without limitation artwork, photographic materials, transparencies, embroidery files, printing screens and digital files of all descriptions, together with all other intermediate material including proofs, artwork and samples). This is referred to in these Conditions as “Origination Items”. Subject as provided in this Condition all Origination Items belong to the Company absolutely.
(d) On payment by the Customer of all sums due to the Company, the Company will: (i) return to the Customer the Customer’s Materials; (ii) deliver and transfer to the Customer the Origination Items; and (iii) at the Customer’s request assign to the Customer the Company’s copyright and design right in relation to the design work subject to payment by the Customer of all additional expenses relating to such assignment.
22. Scanning and Archiving
The customer having been advised to retain hard copies of all documents and seek advice from its appropriate professional advisors prior to the destruction of any original documentation, the Company shall not be liable for any loss suffered by the Customer by virtue of any item supplied by the Company being inaccurate, containing defects or being erased unless such loss arises by virtue of the Company’s negligence and/or breach of contract.
Subject always to Condition 23 below:- (a) the Company shall not be liable to the Customer in
respect of a claim relating to the Commissioned Work unless the Customer shall notify the Company in writing of such claim such notice to be received by the Company within the following time limits depending upon the nature of the claim:-
Nature of the Claim Time Limit
Damage, loss or partial loss;
in transit within 1 working day of delivery
Non-delivery within 3 working days of dispatch
Any other claim within 5 working days of delivery
Provided that the above time limits shall not apply where the Customer can show that compliance with the time limits was not possible and that notice of the Customer’s claim had been given to the Company as soon as reasonably practicable.
(b) any liability incurred by the Company in respect of any of the Commissioned Work supplied pursuant to these Conditions howsoever arising shall be limited at the Customer’s option to re-printing the Commissioned Work, refunding the costs or fees paid or replacing or refunding the cost of the Customer’s Materials, save that nothing in this Condition shall operate to exclude any liability on the par t of the Company for personal injury or death.
These Conditions do not and will not affect the statutory rights of the Customer as a consumer. No provision in these Conditions which would be void by virtue of Section 6 or Section 20 of the Unfair Contract Terms Act 1977 (as amended) shall apply to any consumer transaction governed by these Conditions.
For the purposes of the foregoing the expressions “consumer” and “consumer transaction” shall have the respective meanings given thereto in paragraph 2 of the Consumer Transactions (Restrictions on Statements) Order 1976 (as amended).
26. Force Majeure
The Company shall not be liable to the Customer or be deemed to be in breach of any order for the Commissioned Work by reason of any delay in performing or failure to perform any of the Company’s obligations in relation to the order placed by the Customer if the delay or failure was due to any cause beyond the Company’s reasonable commercial control.
27. Customer’s Warranty and Indemnity
(a) The Company may refuse to print any material which
in its opinion contains any defamatory or obscene matter or may infringe any Intellectual Property Rights of any third party.
(b) The Customer warrants to the Company that it owns the Customer’s Materials and all Intellectual Property Rights in them and that the Customer’s Materials do not infringe any Intellectual Property Rights of any third party and would not if used in or in relation to the sale of any Commissioned Work or the provision of any services infringe any Intellectual Property Rights of any third party.
(c) The Customer warrants that it has complied fully with the Data Protection Act 1998 and all other relevant legislation, that it has obtained all necessary consents from data subjects for the use of such data subjects personal data which it requires the Company to process.
(d) The Customer shall indemnify the Company and keep it indemnified in respect of all costs, claims, liabilities and expenses to which the Company may be subject as a result of a breach of clause 27(a) and (b) above. The indemnity shall extend (without limitation) to any amount paid on a lawyer’s advice in settlement of any such claim and to the Company’s legal costs.
28. Social Media
The Company may from time to time add pictures of it’s work to it’s website and social media. By placing an order you are giving permission for the Company to upload digital images of your order. If you do not wish images of your order to be shared, please make this clear to the sales staff at the point of order.
29. Insolvency and Breach
(a) Any Order may be terminated by either party at any time by notice in writing if the other party, being an individual or partnership, has a statutory demand or bankruptcy petition issued against him or any partner or applies to the court for an interim order under the Insolvency Act 1986 or makes a proposal for an individual voluntary arrangement under that legislation or, being incorporated:- goes into compulsory or members voluntary liquidation or passes are solution for voluntary winding up or its directors convene a meeting of shareholders for that purpose; or – has an administrative receiver or receiver appointed over all or any part of its assets or under taking; or – is the subject of any judgment or order made against it which is not complied with within seven days or is the subject of any execution, distress, sequestration or other process levied upon or enforced against any of its assets; or
– has any action, step, legal proceedings or other procedure taken in respect of it by its directors, shareholders, bankers, creditors or any person seeking to appoint a liquidator or an administrator or takes any such act or step itself; or
– has proposed in respect of it a company voluntary arrangement pursuant to the Insolvency Act 1986 as amended from time to time; or – ceases or threatens to cease to carry on business;
or – gives the terminating party reasonable grounds for believing that it (the other party) is unable to meet its debts as they fall due within the meaning of Section 123 of the Insolvency Act 1986 as amended.
(b) If the Customer is in breach of any of its obligations under these Conditions or the Conditions are terminated by the Company under (a) above, then the Company without prejudice to any of its other rights may immediately suspend the performance of any order placed by the Customer and shall be entitled to charge the Customer, and the Customer shall immediately become liable to pay, for any Commissioned Work already carried out (whether completed or not) including the cost of any materials purchased on behalf of the Customer.
In the event of any provision of these Conditions being or becoming legally ineffective or unenforceable either in its entirety or in part this shall be without prejudice to the validity of and shall not invalidate the remaining provisions of these Conditions which shall remain in full force and effect.
31. Entire Agreement
(a) These Conditions constitute the entire agreement of the parties as to the subject matter hereof and supersede all previous agreements and understandings (if any) between the parties and all representations made with respect thereto, unless agreed in writing and signed and dated by both parties as a variation to these conditions.
(b) The Customer acknowledges that he has not relied on any representation or warranty not contained in these Conditions.
(c) It is expressly provided that nothing in these Terms and Conditions shall exclude any liability of the Company for fraudulent misrepresentations.
32. Third Party Rights
No person who is not a Customer shall have any rights pursuant to the Contracts (Rights and Third Parties) Act 1999.
33. Governing Law
These Conditions shall be governed by English law and the parties hereby submit to the non-exclusive jurisdiction of the English Court.